# K160784: CAM Titanium Blanks

- Pathway: 510(k) (Traditional)
- Applicant: Altatec GmbH
- Decided: Sep 14, 2016 after 176 days
- Product code: NHA (Abutment, Implant, Dental, Endosseous)
- Device class: 2
- Regulation: 21 CFR 872.3630
- Recalls of this device: none
- Data: FDA decisions to Oct 25, 2026; recalls to Oct 12, 2026

## Lineage
Longest line of descent: 14 generations back to K894844 (1990). 171 ancestors in all.
1 later device descends from it; 1 cites it directly.
0 of 173 devices in its family (counting itself) have a Class I recall.

## Predicates on the family tree (from the FDA summary)
- K150203: Medentika CAD/CAM Abutments, Medentika GmbH (2015) Summary page 4.

## Most influential descendants
- K200355: Duranext Abutments (2020), 0 descendants of its own

## Indications for use
CAM Titanium Blanks are intended for the fabrication of abutments and healing caps on CAMLOG® SCREW-LINE and CAMLOG® ROOT-LINE implants in the maxilla and mandible for the purpose of supporting single or multiple tooth prostheses of a partially or fully edentulous patient. Digitally designed abutments fabricated with CAD/CAM techniques for use with CAMLOG® CAM Titanium Blanks are intended to be sent to a CAMLOG validated milling center for manufacture. CAM Titanium Blanks are intended for the fabrication of abutments and healing caps on CONELOG® SCREW-LINE implants in the maxilla and mandible for the purpose of supporting single or multiple tooth prostheses of a partially or fully edentulous patient. Digitally designed abutments fabricated with CAD/CAM techniques for use with CONELOG® CAM Titanium Blanks are intended to be sent to a CAMLOG validated milling center for manufacture. CAM Titanium Blanks are intended for the fabrication of abutments and healing caps/gingiva former on iSy® implants in the maxilla and mandible for the purpose of supporting single or multiple tooth prostheses of a partially or fully edentulous patient. Digitally designed abutments fabricated with CAD/CAM techniques for use with iSy® CAM Titanium Blanks are intended to be sent to a CAMLOG validated milling center for manufacture.

Source page: https://510kreport.com/device/K160784
Methodology: https://510kreport.com/methodology