# K243403: BD Nexiva™ Closed IV Catheter System

- Pathway: 510(k) (Traditional)
- Applicant: Becton Dickinson Infusion Therapy Systems, Inc.
- Decided: Jul 25, 2025 after 267 days
- Product code: FOZ (Catheter, Intravascular, Therapeutic, Short-Term Less Than 30 Days)
- Device class: 2
- Regulation: 21 CFR 880.5200
- Recalls of this device: none
- Data: FDA decisions to Oct 25, 2026; recalls to Oct 12, 2026

## Lineage
Longest line of descent: 8 generations back to K942988 (1995). 22 ancestors in all.
1 later device descends from it; 1 cites it directly.
0 of 24 devices in its family (counting itself) have a Class I recall.

## Predicates on the family tree (from the FDA summary)
- K183399: BD Nexiva Closed IV Catheter System, Becton Dickinson Infusion Therapy Systems, Inc. (2019) Summary page 5.

## Most influential descendants
- K261041: ClearSafe Closed System (2026), 0 descendants of its own

## Indications for use
BD Nexiva™ Closed IV Catheter System - Single Port BD Nexiva™ Closed IV Catheter System is intended to be inserted into a patient's peripheral vascular system for short term use to sample blood, monitor blood pressure, or administer fluids. These devices may be used for any patient population with consideration given to adequacy of vascular anatomy, procedure being performed, fluids being infused, and duration of therapy. The 22-18 GA (0.9-1.3 mm) devices are suitable for use with power injectors set to a maximum pressure of 300 psi (2068 kPa) when access ports not suitable for use with power injectors are removed. BD Nexiva™ Closed IV Catheter System - Dual Port BD Nexiva™ Closed IV Catheter System is intended to be inserted into a patient's peripheral vascular system for short term use to sample blood or administer fluids. These devices may be used for any patient population with consideration given to adequacy of vascular anatomy, procedure being performed, fluids being infused, and duration of therapy. The 22-18 GA (0.9-1.3 mm) devices are suitable for use with power injectors set to a maximum pressure of 300 psi (2068 kPa) when access ports not suitable for use with power injectors are removed.

Source page: https://510kreport.com/device/K243403
Methodology: https://510kreport.com/methodology