510(k) · Cleared
ClearedOsteonics Spinal System-Toploading Transverse Connector Assembly
Data to Oct 25, 2026 (FDA decisions) Oct 12, 2026 (recalls) Sep 30, 2026 (MAUDE) refreshed weekly
Osteonics Corp. · MNH Orthosis, Spondylolisthesis Spinal Fixation
Cleared on Jan 17, 1997 after an 80-day review. The FDA summary names its predicate without a number.
- Decided
- Jan 17, 1997
- Review
- 80 days
- Class
- Class II
- Product code
- MNH
- Recalls
- None
- Predicates
- 0
The FDA summary names its predicate without a number.
Sources: FDA 510(k) database (decision fields), the FDA summary (predicates and indications), FDA recall and enforcement reports, and MAUDE; processed by 510(k) Report. Verify on FDA.gov · Methodology and accuracy.
Planning a device in MNH? A 510(k) Report weighs predicate choices, recall history and review times for a new device like this one.
- Candidate predicates for a device like this, rankedin the report
- Recall history across each candidate’s familyin the report
What was it cleared against? (4)
Devices the submitter claimed this one is substantially equivalent to (*), and reference devices cited for a specific test or feature (†), as written in the FDA summary.
| Type | Number | Device | Decided |
|---|---|---|---|
| * | — | Osteonics® Spinal System Named without a submission number | |
| * | — | TSRH™ Spinal System Named without a submission number | |
| * | — | GDLH™ Posterior Spinal System Named without a submission number | |
| * | — | ISOLA Spinal System Named without a submission number |
What descends from it?
No later submission names this one as a predicate yet.
Has anything in its family been recalled? (0 Class I)
No FDA recall names this device.
No ancestor or descendant has a Class I recall.
How does its category compare?
All MNH devicesMNH Orthosis, Spondylolisthesis Spinal Fixation: FDA decisions, review times, recalls and adverse event reports over 20 years.
FDA decisions per year · MNH
8in 2016
2026 to Oct 25, outlined.
Median 510(k) review, days · MNH
93in 2016
Receipt to decision; years with fewer than 3 clearances left blank.
Recalls per year · MNH
1in 2016
Class I (0 since 2007) Class II/III not classified
Adverse event reports per year · MNH
89in 2025
MAUDE reports naming product code MNH, not matched to any one device; reports are not rates.
View these four charts as a table
| Year | Decisions | Median 510(k) review, days | Recalls (Class I) | MAUDE reports |
|---|---|---|---|---|
| 2007 | 5 | 123 | 0 | 18 |
| 2008 | 13 | 65 | 0 | 30 |
| 2009 | 13 | 151 | 7 | 45 |
| 2010 | 10 | 106 | 0 | 59 |
| 2011 | 17 | 171 | 0 | 107 |
| 2012 | 7 | 93 | 1 | 433 |
| 2013 | 10 | 124 | 1 | 464 |
| 2014 | 12 | 140 | 0 | 286 |
| 2015 | 10 | 99 | 0 | 152 |
| 2016 | 8 | 93 | 1 | 216 |
| 2017 | 0 | — | 0 | 174 |
| 2018 | 0 | — | 0 | 129 |
| 2019 | 0 | — | 0 | 403 |
| 2020 | 0 | — | 0 | 432 |
| 2021 | 0 | — | 0 | 531 |
| 2022 | 0 | — | 0 | 265 |
| 2023 | 0 | — | 0 | 121 |
| 2024 | 0 | — | 0 | 302 |
| 2025 | 0 | — | 0 | 89 |
| 2026 | 0 | — | 0 | — |
What is it indicated for?
The subject components of the Osteonics® Spinal System Top Loading Transverse Connector Assembly are single-use devices which are sold non-sterile, and are intended for use only with other components of the commercially available Osteonics® Spinal System. The components of the Osteonics® Spinal System, including the additional components described herein, are available in either ASTM F-138 Stainless Steel (Type 316 LVM) or ASTM F-136 Ti6Al4V Alloy.…
Read the full statement (221 words)
The subject components of the Osteonics® Spinal System Top Loading Transverse Connector Assembly are single-use devices which are sold non-sterile, and are intended for use only with other components of the commercially available Osteonics® Spinal System. The components of the Osteonics® Spinal System, including the additional components described herein, are available in either ASTM F-138 Stainless Steel (Type 316 LVM) or ASTM F-136 Ti6Al4V Alloy. Stainless steel components are intended for use only with other stainless steel components; Ti6Al4V alloy components are intended for use only with other Ti6Al4V alloy components.
The specific indications of the Osteonics® Spinal System. including the subject additional components, are stated below:
For non-pedicular use:
Long and short curve scoliosis,
Vertebral fracture or dislocation.
Spondylolisthesis,
Degenerative disc disease (defined as back pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies).
For pedicular use:
When used as a pedicle screw system, the system is intended for patients: (a) having severe spondylolisthesis (Grades 3 and 4) at the LS-S1 joint; (b) who are receiving fusions using autogenous bone graft only; (c) who are having the device fixed or attached to the lumbar and sacral spine; and (d) who are having the device removed after the development of a solid fusion mass. Pedicle screws are not intended for placement in pedicles above L3.
Indications for use read by OCR from a scanned FDA summary, so letters may be misread. Check the PDF before quoting it.
https://510kreport.com/device/K964304 · printed Nov 6, 2026
Cite this page
510(k) Report. “K964304: Osteonics Spinal System-Toploading Transverse Connector Assembly.” Lineage record from FDA 510(k) data and the FDA summary. Updated Nov 3, 2026. Accessed Nov 6, 2026. https://510kreport.com/device/K964304
Report an extraction error
Are you the manufacturer?
Record history
- FDA decision record loaded May 2, 2026
- Summary read Oct 13, 2026 (extraction version 9eaa42aa01ed)
- Page last updated Nov 3, 2026